Launch X431 PRO 5 OBD2 Scanner Diagnostic Tool Support ECU Programming Support ADAS.Support the whole system diagnosis of more than 100 auto brands in America, Europe, Asia and other models.
Launch X431 PRO 5 Highlights
1.Automatic generation of diagnostic report, can be sent to the computer by Email printed paper diagnostic report
2.Online one-click upgrade, convenient for users to update software at any time
3.Quick detection of the whole car system and one key to clear the whole car fault code
4.Data stream recording function (Record), convenient for users to view historical data stream at any time
5.Feedback function, convenient for users to Feedback problems to us for analysis, and help users solve problems
6.Value, figure, and combination A maximum of four data flows can be displayed on the same interface, saving data flow samples and comparing data flow samples with real-time data flows, facilitating data flow waveform comparison and fault analysis
Launch X431 PRO 5 Functions
1. Read ECU version information
2. Read the fault code
3. Clear the fault code
4. Read data stream
5. Action test 6. Special functions
What Does Launch X431 PRO 5 Support
1.Support the Online Coding function of Volkswagen, Audi, BMW, Porsche and other models;
2.VCI connector supports J2534, DOIP, CANFD protocol
3.The VCI connector supports DC9~36 V and heavy truck protocol, which can be easily extended to a common diagnostic instrument for passenger cars and heavy trucks (you can open the software for heavy trucks and purchase non-standard 16PIN connectors for heavy trucks) Note: Heavy truck software and non-16PIN heavy truck connectors are not standard , subject to additional charges
4.Support the Guide function of various models of VAG;
5.Support FCA gateway to better cover new models and functions of FCA;
6.Support ADAS and tire pressure tool extension;
7.Support 21 common special functions of mainstream models;
8.Support system-wide diagnosis of 100+ brand models including Engine, Transmission, Airbag, ABS, ESP, TPMS, Immobilizer, Gateway, Steering, Radio, Air Conditioning and other systems;
9.Support full system functions: read ECU version information, read fault codes, clear fault codes, read data stream functions, action test, special functions;
10.AutoVIN automatically identifies the vehicle for quick diagnosis;
Launch X431 PRO 5 Parameters
Display: 10.1-Inch, 1920x1200 FHD IPS
CPU: 8-Core Processor, 1.8 GHz
Camera: first 5 million pixels, last 8 million pixels
WI-FI: 2.4GHz /5GHz Dual Band
Android 9.0
RAM: 4G, ROM 64G
Battery: 7000mAh / 3.8V
Operating voltage: 9~36V
Storage Temperature:-20℃~70℃ (-4℉~158℉)
Working Temperature: 0℃~50℃ (32℉~122℉)
Dimension: 267*191*33 mm (10.51*7.52*1.30 inch)
Package size: 594*164*410 mm (23.39*6.46*16.14 inch)
Net Weight: g(lb)
Package Lists: See Package Lists
Multilingual Support: Chinese Simplified, English, Chinese Traditional, Japanese, Korean, French, Spanish, Portuguese, Italian, Russian, German, Polish, Romanian, Dutch, Arabic, Czech, Danish, Greek , Persian, Finnish, Hungarian, Swedish, Turkish, Serbian, Croatian
VCI Connector Parameters
RAM: 256M
ROM: 8G
Wi-Fi: 2.4GHz/5GHz dual-band
Working Temperature: 0℃~50℃ (32℉~122℉)
Operating voltage: DC9~36 V (open the heavy-duty card software and purchase the heavy-duty card connector
It can be easily extended to heavy trucks) Note: It is not standard and needs to be paid separately.
Dimension: 200*75*40 mm (7.87*2.95*1.57 inch)
New protocol support: J2534, CANFD, DOIP
OBD function
1、Read I/M Readiness
2、Read Live Data
3、Read Freeze Frame
4、Read Fault Code
5、Clear Fault Code
6、O2 Sensor Monitor
7、Test Results On-board Monitor Test
8、Control Operation of On-Board Component/System
9、Read Vehicle Information
Service Function
1. Oil Reset
2.Throttle Adaptation(37)
3. SAS Reset (44)
4. EBP Reset (41)
5. TPMS Reset
6. IMMOBILIZER
7. BMS Reset(31)
8. ABS Bleeding(34)
9. Gear Learning
10. Injector Coding
11. DPF Reset(39)
12. AFS Headlam Reset
13. Gearbox Reset
14. Suspension Reset(11)
15. Sunroof Reset
16. Seats Calibration(18)
17. IMMOPROGRAM
18.Transport mode(13)
19. Windows Calibration(15)
20. High Voltage Battery Diagnostics
21. Gas Particulate Filter Regeneration
How to Update Launch X431 PRO 5?
Connect WIFI, select all software, click Update to upgrade all software in one click, convenient and quick
IMPORTANT PURCHASE NOTICE - MUST READ BEFORE BUYING
To ensure a smooth setup and avoid any installation compliance issues, please review the following technical requirements for our professional diagnostic tool:
- Antivirus Compatibility (False Positives): > Because most aftermarket diagnostic software utilizes deep-system emulation to interface directly with your vehicle’s ECU, strict security tools (like Windows Defender) will frequently flag it as a threat. This is a standard false positive. For successful installation, the software must be added to your antivirus "Exclusion List" or the antivirus temporarily disabled during use. If you are uncomfortable with this standard protocol, please consider alternative options.
- Pre-Installed Software Activation Required: > If your package includes a pre-installed hard drive (HDD/SSD), the system and diagnostic software are securely locked for transit and require activation before first use. Upon receiving your package, please contact our support team immediately to get remote activation service. It is not defective; it simply requires a 5-minute initial unlock.
- HDD/SSD Compatibility & Restrictions (Except SKU: DS036): > Please note that ALL our software hard drives are designed as internal drives and CANNOT be used via a external USB enclosure, with the sole exception of SKU: DS036(Alldat* software). Before purchasing, please ensure the physical size and interface (e.g., 2.5" SATA) of our drive are fully compatible with your laptop's internal slot. If you are unsure about compatibility, please contact our customer support before buying.
- Pre-installed software HDD/SSD Warranty Void Policy: > Our pre-installed software contains encrypted configurations. Any attempt to duplicate, clone, or copy the files from our hard drive to another device will permanently lock the software and instantly VOID your product warranty. We do not provide after-sales support or refunds for drives that have been privately copied.
- Professional Remote Tech Support (Optional & Secure): > Automotive diagnostic software setup can be complex. We offer 100% free, secure remote technical assistance via TeamViewer to help you configure the system. This service is entirely optional. We respect your data privacy and will only perform necessary software configurations with your permission.
