FoxFlash ECU programmer is a complete tool for reading and programming engine control units via OBD/Boot mode/Jtag systems/Full system and Bench modes
Foxflash Chip Tuning Tool is an ECU & TCU Clone
FoxFlash is a new, unique and revolutionary tool for automotive professionals, tuners and engine calibration engineers.
Since the FoxFlash is so much more than just an ECU programming tool, it simply can’t be compared to any traditional flash tool. Despite other tools how good, this is being good tools for read/write operations, we supply many important features, both on the developer side and in daily use. That is why we recommend FoxFlash.
FoxFlash Support ECU/TCU List
FoxFlash Highlights:
1. Master version
2. Full protocols open
3. VR read online work (some ECUs need to use our VR system, the tool auto-connect to our server download file )
4. ECU can be restored to its original if your ecu was damaged or met some bad tuning, use our tool can restore it to its original.
5. Free update. No subscription, and no annual fee. No activation.
6. Tool can online and offline work (some of ecu and functions can be offline)
7. Auto checksum
8. Online support
9. Multi-language
10. Two Years Warranty.
11. Excellent technical support.
12. Help desk and tuner account
13. ECU and TCU connect wires with pdf
14. Auto support EEPROM and flash checksum
15. Support MEDC17 free clone service (most other tools need to patch the files after read-out, but ours is free)
16. With the Latest firmware and updates. Use better quality BOM and PCB. More stable, foolproof, and reliable.
17. FoxFlash ECU TCU Car List, or check driver list on dfb-technology, it is much easier to search than pdf
18. Language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Romanian, Czech, Turkish
19. Compatible Operating Systems: Windows 7, 8/8.1, 10, 11 64 bits, Recommended
20. Configuration: CPU > 2.5 GHz (Intel i5, i7), RAM > 4GB
What is FoxFlash?
FoxFlash is a powerful solution developed for professional chiptunes, calibration engineers and control unit (ECU and TCU) repair shops. FoxFlash includes multi-method control unit programming for tuning ability, this tool is from tuner design, so you can get many of them support.
FoxFlash is a powerful tool for ECU and TCU and supports a lot of modes.
1. OBD mode：(read the data from Diagnostic port ,you need remove the ecu or TCU from car or open the ecu box , just read everything from car, supports OBD VR read, and original file from our server, you can direct OBD VR read it )
2. BENCH mode: With service mode, you can use this mode to clone or backup all ecu data, read the internal flash and external flash and EEPROM data, so you can save a lot of money for cloning ecu and TCU, and you also can clone TCU and chip tuning with this mode.
3. Jtag mode: open the ECU, and wire it or use our adapter to connect ecu ways, some of the Denso ECUs always need to use this mode for reading and writing.
4. Boot mode: open the ecu and always can back up everything, read the flash and EEPROM, you can save some ecu cause your OBD to write failed, or some other reason causing the ecu dead.
5. Full system: you can read and write by pinout for most of ecu and tcu
6. BDM mode: some of the ECU need to read and write in BDM mode, open the ecu and use our adapter to connect it
Operating System:
Windows 7
Windows 8/8.1
Windows 10
Windows 11
FoxFlash Supported Functions:
ECU clone
TCU clone
Chiptuning
Stage1-stage4
Vmax off
Adblue and SCR off
DPF OFF
Flaps OFF
pop bangs
gearbox data to adjust LC
sport display
immo off
dpf off
dtc off
GPF/OPF Removal
DPF Removal
EGR Removal
DTC Removal
ADBlue Removal
HOT Start Fix
IMMO Removal
Readiness Calibration
Flaps / Swirl Removal
TVA Removal
Sport Displays Calibration
Cold Start Noise Reduction
Kickdown Deactivation
StartStop Disable
MAF Removal
Speed Limiter Removal
Torque Monitoring Disable
Burbles Activation
Popcorn Activation
EVAP Removal
Exhaust Flap Removal
SAP Removal
AGS Removal
BMS/BPCM
Lambda/O2 Removal
Launch Control
OBD Reading Protection
Boost Sensor Calibration
LC, AL and NLS for MED9.1
Checksum Fix
vmax, swirl off
restoring ECU or TCU factory setting service
VIN fix (EEPROM support checksum, so you can easily change VIN and then write back )
Compatibility
Supported Control Units
We believe a control units list can be considered a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.
Please note that FoxFlash can help you select the right protocol with its auto-detection feature during identification on most control units.
Support types:
1. CAR
2. TRUCK
3. MOTORBIKE
4. BOAT
5. Additional TCU package available for Automatic Transmission.
Supported Winols Damaos supply
As we all know, windows Damaos and A2L are very expensive, with a FoxFlash, you will have this function for free, so you can get it for chip tuning, DTC off, and so on.
BENCH MODE for complete reading and writing (full backup) TRW EMS2.2 and TRW EMS2.3
FULL READ AND WRITE VIA PINOUT IN BENCH MODE:
- BOSCH EDC7
- BOSCH EDC16
- BOSCH ME9 / MED9
FULL READ AND WRITE VIA PINOUT IN BENCH MODE
- BOSCH MD1
- BOSCH MG1
- FREESCALE SPC5777
- AURIX TC29x
- ST SPC58
FULL READ AND WRITE VIA PINOUT IN BENCH MODE:
- BOSCH EDC17
- BOSCH MED17 / ME17
- SIEMENS PCR2.1
(Unlocking is also possible via pinout)
FULL SYSTEM VIA PINOUT (MICRO/FLASH + EEPROM) OF ECUs:
- BOSCH
- CONTINENTAL
- DELCO
- DENSO
- MARELLI
- SIEMENS
- TEMIC
BDM E JTAG MODES FOR:
- BDM MPC 55x
- BDM MPC 56x
- BDM MC32 / ZC32
- BDM HC12 / S12x
JTAG NEXUS MPC/SPC 56xx
JTAG NEXUS MPC 55xx
JTAG RENESAS
SH7055
SH7058
SH7059
SH7251
SH72543
SH72544
JTAG NEC 76F00xx
76F0038AGD
76F0038GD
76F0039AGD
76F0039GD
76F0040GD
76F0070
76F0085
ADDITIONAL PACKAGE FOR AUTOMATIC TRANSMISSION:
- FULL READ AND WRITE TCU (MICRO+EEPROM)
- TCU CLONING
- TCU CODING FUNCTIONS
FoxFlash Update Log:
21/7/2022
NEW DRIVER FULL SYSTEM ON THE BENCH FOR ACDelco E78 E80 E39A OPEL / CHEVROLET / BUICK ECUs
18/7/2022
NEW OBD DRIVERS FOR CARS NISSAN, RENAULT, INFINITI, AND DACIA WITH ECU CONTINENTAL SID310
18/7/2022
Added automatism to clone the following control units with OTP zone adaptation and password:
- BRP Can-Am ME17.8.5
- BMW MED17.2
- BMW MEV17.2
30/6/2022
NEW BOOT MODE (BAM) FOR DELPHI CRD2.xx AND CONTINENTAL EMS S8 CONTROL UNITS
FoxFlash ECU Programmer Package List:
Hardware:
1pc x Master machine
1pc x Fox bench box
1pc x USB cable
1pc x Power adapter
1pc x Fox box store over 10 adpaters
1pc x Jtag and bdm cables
1pc x Pen
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box
1pc x Install guide
Software:
1pc x Main software
1pc x Technical Support
1pc x Login account for software and tools
1pc x PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support
1pc x Online chat support for use
The extra package is according to the user's request after the user gets the tool.
1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L
