MB SD Connect C4 Plus Star Diagnosis Support DOIP for Cars and Trucks with Free DTS Monaco & Vediamo, reading out & erasing trouble code, reading the real-time data of sensor and actuator, coding and programming.
Top Reasons to Get MB SD C4 PLUS:
1.The new SDconnect C4 (1:1 clone of the original) is able to work for DoIP.
2. It's the only C4 that supports ethernet communication (DoIP).
3. Have tested no issues on new Mercedes with DoIP.
4. You don‘t have to install batteries for firmware update.
5. No need worry about firmware damage in the update process
6. C4 is connected automatically to WLAN for diagnostic tests.
7. The wireless connection is stable. (With Win10 system Xentry software we recommend to use lan cable)
8. remote help is available.
9. Good Quality, It's waterproof, shockproof and tamper proof.
10. With Free DTS Monaco & Vediamo
11. Support both 12V Cars and 24V Trucks.
What is DOIP?
DOIP is ISO 13400 diagnostic protocol
ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.
The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.
The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:
enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.
The mercedes Land Rover JLR all use this new Diagnostic Protocol now.
Where need DOIP device?
when we test mercedes new car like w222 w205
In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that cable is Ok.
Xentry will prompt you that proper cable must carry yellow marks.
The new SDconnect C4 (1:1 clone of the original) is able to work for DoIP.
Compatible with original Benz dealer software.
It's the only C4 that supports Ethernet communication (DoIP).
Have tested no issues on new Mercedes with DOIP
You don't have to install batteries for firmware update.
No need worry about firmware damage in the update process
The wireless connection is stable.
C4 is connected automatically to WLAN for diagnostic tests.
Also, remote help is available.
The C4 machine has good quality.
It's waterproof, shockproof and tamper proof.
Notice: You don't have to install batteries for firmware update. No need worry about firmware damage in the update process.
New MB Compact features:
1. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose;
(With Win10 system Xentry software we recommend to use lan cable)
2. New MB SD Connect Compact 4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. Because old MB STAR C4 main board do not have UDS chip, so old MB STAR C4 can not support it;
3. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;
4. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products.
MB SD Connect C4 Function:
1. New MB SD Connect Compact 4 Star Diagnosis not only works with K line diagnose and CAN BUS,but also for UDS diagnose protocol.Old MB STAR C4 can not support these 2 functions,because old MB STAR C4 main board does not have UDS chip.
2. New MB SD Connect Compact 4 Star Diagnosis supports wifi diagnose. (With Win10 system Xentry software we recommend to use lan cable)
3. Multiplexer supports Lan cable connection.
4. Connector adopts Military quick swap technology, so it can support 10,000 times pull plug, more stable.
5. All core accosseries adopt original new packing chip, 24hours test, product quality is guaranteeed .
Passenger Cars Supported List:
A(176), A(169), A(168), B(246), B(245), CLC(117),C(205) C(204) C(203), C(202), 190(201), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126), E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140), SLK(172), SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197), M(166), M(164), M(163), G(463), G(461), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107), SLS(197), M(166), M(164), M(163), G(460), GL(164), GLK(204), R(251)
Van Supported List:
MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638), V(638), Viano(639), T2, Vario, Vaneo(414)
Truck Supported List:
Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series
Unimog Supported List:
U20, UGN, UHN
Bus Supported List:
TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO, O350/ O403, CONECTO, O404, O405- O408, Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/ OH, OH, OH368, OF, OF384, LO, O400, FURTHER MODEL SERIES
What is the Difference About All Mercede Benz Diagnosis Tools
| Name | MB Star C3 | MB Star C4 | MB Star C5 | SD C4 Plus DOIP | SD C5 DOIP | Benz eCom | Benz C6 VCI | Benz OEM C6 |
| Image |  |
 |
 |
 |
 |
 |
 |
 |
| Features | Main for old Mercedes till 2015 | Good at diagnosis and programming | Function same as C4 | Work with original Xentry XDOS, Doip Enabled |
Newest firmware, Doip Enabled |
Support DOIP |
Work with Dongle, same look as the genuine c6 |
support wifi and doip |
|
Software Compatibility |
Factory HDD/SSD Only |
Factory HDD/SSD, Original Software |
Factory HDD/SSD, Original Software |
Factory HDD/SSD, Original Software |
Factory HDD/SSD, Original Software |
Factory HDD/SSD Only |
Factory HDD/SSD Only |
Factory HDD/SSD Only |
| Update | By HDD/SSD | By HDD/SSD | By HDD/SSD | By HDD/SSD | By HDD/SSD | By HDD/SSD | By HDD/SSD | By HDD/SSD |
| Wifi | No | Yes | Yes | Yes | Yes | No | No | Yes |
| Diagnosis | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Programming | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| SCN Coding | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Xentry | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| DAS | Yes | Yes | Yes | Yes | Yes | No | No | Yes |
| EPC | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| WIS | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| SD Media | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Star Finder | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| PL73 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| DTS Monaco | No | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Vediamo | No | Yes | Yes | Yes | Yes | Yes | Yes | No |
| DOIP | No | No | No | Yes | Yes | Yes | Yes | Yes |
| New Mercedes | No | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Old Mercedes | Yes | Yes | Yes | Yes | Yes | No | No | No |
SD C4 PLUS DOIP PCB Board
Latest SD C4 Xentry Software includes:
- Xentry: 2021.03
- DAS: 2021.03
- EPC: 2018.11
- WIS: 2020.10
- SDmedia: 2015.01
- Vediamo: 5.01.01
- Star Finder : 2016, Add Starfinder2020
- PL72
- DTS Monaco 8.14 + 8.16.015 with 2019 database
Testable systems:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
Bz ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM
MB SD C4 software includes:
Quick Test: the vehicle ECU for rapid testing, test at the same time, you can choose to edit more functionality.
Variant Coding: add VO-delete VO variation functional.
ID identification: one-click to read the whole car and saved, all module programming.
Complete Variant Coding: read all ECUcoding vehicle data in one pass, write again to the vehicle, completely offline.
Diagnostic Services and advanced features can see internal and external data you choose modules, open computer authorization (not authorized), activate the ECU reset ECU, modifying the original chassis number.
Flash programming: completely off-line programming,
Diagnostic Trouble Code diagnosis module DTC trouble code.
ECU Exchange: two of the same ECU, are exchanged by reading the data to import the data.
Symbolic trace: recording a trace file
MB SD C4 PLUS Support DOIP Software Display:
Package includes:
1pc x DOIP SD C4 PLUS Multiplexer
1pc x OBDII 16PIN Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 8PIN Cable
1pc x Lan Cable
Contact Information
Whatsapp:+86 136 1282 7578
Email: info@getobdtool.com
Skype: getobdtool
