Wifi VOCOM II 88894000 With APCI PPT 2.7.25 Tech Tool Diagnostic Scanner for VOLVO Excavator Heavy Truck

What is VOCOM II 88894000 ?

Volvo VOCOM II 88894000 with APCI PPT(Premium Tech Tool ) 2.7.25 tech tool is the latest diagnostic hardware tool for excavator trucks, buses, engine and mechine diagnosis, programming and maintenance. It provide communication and translation between computer and vehicle. A dealer tool to access and program parameters in Level2 and Level3 without connecting to central severs, work with Tech Tool (VCADs Pro), Normal or Development mode.

About VOCOM II 88894000 Interface

 New VOCOM II interface is designed with focus on robustness and durability to withstand the tough workshop environment. Comparing with Vocom I, Vocom II has:

1. Improved LED indicatiors
2. Improved quality of cables
3. Military standard of connectors
4. Better liquid and dust ingress protectors
5. Metal casing and rubber bumpers for better protection
6. Operates from -40 Celsius to +85 Celsius
7. Shock resistance: 2 meters

Interface Feature of VOCOM II 88894000

1. J1708 
2. ISO15765
3. ISO13400/DOIP
4. ISO09141
5. CAN
6. CAN FD
7. J1939
8. KWP2000 
9. Battery Voltage Level Check
10. WLAN 802.11N 5GHZ
11. Automotive Ethernet Protocol Support
12. Configuration tool
13. IP67 level water/dirt resistance
14. ROHS - All applicable products in the EU market after July 1, 2006 must pass RoHS compliance

Design and Function of VOCOM II 88894000

VOCOM II has a ruggedized design with an aluminum enclosure and ECTA connectors for OBD interfaces (vehicle side) and USB interfaces (host side). The WLAN antennas are located under the plastic cap with the function indicators.

1 ECTA-26/OBD Connector                    4 Carry strap with Velcro fastener

2 Rubber protector                                  5 Plastic cap with WLAN antennas and function indicators       

3 Aluminium enclosure                            6 ECTA-12/USB connector with dust cap

Most Powerful and Efficient Solution in the market- VOCOM II 88849000

1. Latest and fullest diagnositc software
2. Electrical Wiring Diagrams - FM, FH, FL, FE
3. Developement access - configure more than 11000 parameters of ANY level without any restrictions (APCI)  For example: Minimum/Maximum values like speed limit, chassis ID change, injetor programming, EURO 6 configuration available, clutch calibration etc.
4.  Minimum/Maximum values like speed limit,
5. Chasis ID Change
6. Injector programming
7. EURO 6 configurations available
8. Clutch calibration
9. Supported Multi-language: English, Czech, Danish, German, Spanish, French, Italian, Magyar, Dutch, Polish, Portuguese, Romanian, Swedish, Turkish, Russian, Lithuanian and other.

Truck Coverage

Volvo Trucks - Older electrical system, Vehicle electrical system '98; VERSION2, VERSION3; VERSION4 - FH4/FM4;

Volvo Buses - Conventional, Multiplexed, Multiplexed v2, Multiplexed v3;

Volvo Construction Equipment;

Volvo Penta, Marine engines - VERSION2, VERSION3;

Volvo OEM Component Customer - VERSION2, VERSION3;

Mack Trucks - V-MAC I/II/III, ITC, IV, IV+;

Renault Trucks - VERSION2, VERSION3, VERSION4; (EURO 6, DXI, DTI)

UD Trucks - VERSION2, VERSION3. 

For Volvo Vocom Trucks:
AC  Compo4  F10  F12  F16  FE FH FH12 FH16 FH565 FL FL10 FL12  FL6 FL7 FM FM10 FM12 FM9 FM7 Nh12 NH525 NH565 NL10 Nl12 VAh VHD Vm VN VT WC WG WI WX
 
For Volvo buses:
B10B  B10L B10M B10R B11R B12 B12B B12M B12R B13R B58 B5LH B5RH B6 B6R  B7FB B7L B7R B9L B9R B9S B9TL BXRC COMP12
 
Wheel Loader:
L110E  L110F L110G L120E L120F L120G L150E L150F L150G L180E L180F L180G L220E L220F L220G  L250G L330E L350F L45F-TP L45F-TPS L50F-TP L50F-TPS L50G-TP L50G-TPS L60E L60F L60G L70E L70F L70G L90E L90F L90G
 
Articulated Hauler: 
A25D A25E A25F A30D A30E A30F A35D A35E A35F A40D A40E  A40F T450D

Grader:
G710B G720B G726B G730B G740B G746B G780B G930 G930B G940 G940B G946 G946B G960 G960B G970 G976 G990
 
Skid Steer Loader:
MC110B MC60B MC70B MC80B MC90B
 
Compact Excavator:
EC55C EC80D ECR88 EW60C
 
Paver:
ABG7820B ABG8820B P7820C L882C
 
Other:
CARETRAC

Mack Trucks - V-MAC I/II/III, ITC, IV, IV+;

Renault Trucks - VERSION2, VERSION3, VERSION4; (EURO 6, DXI, DTI)

UD Trucks - VERSION2, VERSION3. 

Specifications of VOCOM 

Operating System: Win7,8,10 (32/64 bit)
Vehicle Power Supply: Support 12V/24V powe supply, operating voltage 6~32V
CPU: QUALCOM/Atheros AR9350, 32 bit MIPS 74 Kc, 553MHz
RAM: 2x128 MB DDR
Storage: 128 MB NAND FLASH 16 MB NOR FLASH
USB: USB 2.0 high power device
Network Interface: USB Ethernet communication via RNDIS interface
WIFI Standards and Frequency Bands: IEEE 802.11 a/b/g/n  Hardware support 2.4 and 5 GHz operation
WIFI Security: WPA(TKIP/PSK), WPA2(PSK/Enterprise), WPS
WIFI Configuration: Infrastructure( Access Point/Client) and WIFI-direct
Vehicle Connector: ECTA/OBD
Vehicle Interface: CAN,J1708, k-Line, DoIP/Ethernet, Digital I/O
Diagnostic APIs: RP1210C, J2534, J2534-1, VOCOM II Smartphone API
Operating environment:Temperature Range: -40°C - +85° C(-40°F-+185° F) , Humidity:75%

VOCOM II 88894000 WLAN Instruction

1. Make sure the VOCOM II is connected to the computer via USB. Open the VOCOM II configuration application. Located under the START menu. The VOCOM II should display as a device listed as below.

2. Under the information 1 tab, click on the Edit2 button in the Menu bar. In the Configuration page, click on the pair3 button. NOTE: pairing is a prerequisite for WLAN usage.

3. In the pairing dialog, the client's computer name(Client Name) will display in the info bar. Click on the pair4 button to save. NOTE: The current paired computer is always displayed in the info bar in the Client ID field.

4.Click the Connection5 tab in the Menu bar. The WALN Configuration page will be shown. NOTE: Two WALN configuration Modes available.

5.The WLAN Infrastructure Mode is normally used in a workshop environment where there is already an existing infrastructure network.

6.The WALN Direct mode is used when the laptop needs to be directly connected to a VOCOM II device via WLAN, e.g. when using it in the field without the existence of an infrastructure network.

7. Afte configuring the VOCOM II WLAN configurations, save 6 and reboot7 the device.

8.Connect the VOCOM II to the vehicle. Uplug the VOCOM II interface cable from the computer's USB port. NOTE: The battery symbol indicator should shine green. The WLAN indicator should shine blue. The WALN signal strength indicators shold be lit. Login to Tech Tool, activate the VOCOM II (WALN) adapter found under Settings.

VOCOM II Package list

• 1pc x Vocom 88890300 interface
• 1pc x 88890305 USB Cable
• 1pc x 88890304 OBD Cable
• 1pc x 88890306 FCI/8 PIN Cable
• 1pc x 88890302 9 Pin Cable
• 1pc x 9993832 14 pin diagnostic cable  

Contact Information
Whatsapp: +86 136 1282 7578
Email: info@getobdtool.com
Skype: getobdtool