Introduction

Vehicle key programming might seem daunting, but with the right tools and guidance, it can be straightforward and efficient. In this blog post, we'll walk you through programming keys for the 2016 Great Wall H6 using the K518 Pro. Whether you are an automotive locksmith or someone interested in DIY car maintenance, this step-by-step guide will offer valuable insights.

Tools and Preparation

Before beginning, ensure you have the following tools ready:

  • K518 Pro OBD Communication Cable: Essential for connecting the programming device to the car.
  • Original Car Key: The functional key presently used with your vehicle.
  • New Key: Produced by our reliable manufacturer Lonsdor, ready for programming.

Step-by-Step Key Programming Instructions

Step 1: Generate a Smart Key

  1. Connect your K518 Pro to the car using the OBD communication cable.
  2. Select 'Generate Smart Key' on the K518 Pro menu.
    • Navigate to the option for 'Great Wall' and then select 'Havl H6'.
    • Choose 'ID 46 Old Version'.
  1. Place the new smart key into the card slot.
  2. Click 'Generate'.
    • Once the device displays 'Generated Successfully', proceed to the main menu.

Step 2: Program the Keys

  1. Select 'IMO and Remote' from the main menu.
  • Choose 'Great Wall', followed by selecting 'H6'.
  • Opt for the settings menu listed for the years 2013 to 2018, selecting 'Smart Key' and 'Type PEPS'.

  1. Program keys using the working key.
    • Turn on the ignition.
    • Place the already programmed smart key underneath the rear water cup holder.
    • Confirm by clicking 'OK'.
    • Wait for the message that indicates the number of keys programmed.
  2. Program additional keys.
    • Follow instructions for each new key, repeating the above sub-steps for each.
    • Click 'Cancel' if no more keys need programming.

Verification of Key Functionality

After programming, it's crucial to verify the functionality of both the original and the new keys:

  • Start the Vehicle:
    • Use the original key: Step on the brake and press the start button.
    • Use the new key: Step on the brake and press the start button.
  • Check Remote Control:
    • Test the lock and unlock functions for both the original and new keys.

Both keys successfully operated the vehicle and worked seamlessly with the remote control functionalities.

Conclusion

Congratulations, you have now successfully programmed your smart key for the 2016 Great Wall H6 using the K518 Pro. This efficient method ensures both the original and new keys function correctly, providing reliability and convenience. Stay connected for more insights and innovations in automotive technology.