100AH BT200 Automotive Load Battery Tester Digital Analyzer Bad Cell Test Tool for Car/Boat/Motorcycle and More

$69.97 $44.99

● Lighter, easy to operate and convenient to collect.
● The LED screen is bigger and clearer.
● Increased protection against electric shock,clips are all wrapped.
● Quick and accurate test result display.
● Applicable battery: 12V Lead-acid batteries.
● Test Method: Four-wire Kelvin test.
● Quick and accurate test result display.

Out of stock

Security Payment

paypalvisamastergoogle payapple payamerican expressbancontact
  • BT200 Battery Tester: Easily, quickly and accurately measure the actual cold cranking amps, capability of the vehicle starting battery, healthy state of the battery itself, and common fault of the vehicle starting system and charging system, which can help maintenance personnel to find the problem.thus to achieve quick vehicle repair
  • In/Out of Vehicle Testing: You could detect bad cell battery directly, save your time to take out the battery from the car. And this battery tester 12v directly test the battery with loss of electricity, no need to full charge before testing
  • Multi-Testing: Support Battery Test , Cranking Test and Charging Test. It can test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, EFB battery, etc. Testing standards include CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
  • Safety Protect Itself: Auto battery load tester support polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery. And It's equipped with a very thick flexible insulator 3.0 feet long cable, which much safer thank other battery analyzers and Increase the distance of use
  • Note:The measured battery voltage is lower than 6V, can not work normally¡¿Testing time just need 5-10s and Shell made of acid-resistant ABS plastic,Not only slippery, but also strong and durable.


BT200 Car Battery Tester works for 12 volts vehicles, which is applicable for automotive manufacturers, automotive maintenance and repair workshops, automotive battery factories, automotive battery distributors, and educational organizations, etc.


Main functions of BT200 Battery Tester:

Battery test:analyze the battery healthy status to calculate the actual cold cranking capability of the battery and the aging extent, which provide reliable analysis evidence for the test and maintenance of the battery. It notifies the user to replace battery in advance when the battery getting aged.

Cranking test:analyze the actual required cranking current and cranking voltage of the starting motor.

Charging test:analyze the charging system, including generator, rectifier, rectifier diode, etc., which it give you reliable data for your reference. If one of the above mentioned parts is not in normal situation, it will lead to over charge or incomplete charge of the battery, thus the battery will be quickly damaged and also greatly shorten the using life.





Latest BT200:

1. Lighter, easy to operate and convenient to collect.

2. The LED screen is bigger and clearer.

3. Increased protection against electric shock,clips are all wrapped.

4. Quick and accurate test result display.

5. Applicable battery: 12V Lead-acid batteries.

6. Test Method: Four-wire Kelvin test.

7. Quick and accurate test result display.








BT200 Battery Tester Advantages:

1. Conductance correlates directly to the battery capacity.

2. Passive testing method is safe.

3. Never discharges or drain the battery.

4. Able to test condition of discharged battery.

5. Consistent and repeatable results.

6. Provides unique indication of battery conditions.

7. Provides check the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required.

8. Powers up when connected to the battery posts during testing.



Why You Need This Battery tester ?

The battery tester will help you test the car battery¡¯s health status and remind you of the timely battery maintenance to avoid the unnecessary losses



Tips:

The battery tester works on car/boat/motorcycle and etc. DC Voltmeter test range is 8-16VDC, and the tester will be damaged if it goes beyond the range.



Test Standards:

Including: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB.


Contact Information
Whatsapp:+86 136 1282 7578
Email: info@getobdtool.com
Skype: getobdtool
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

100AH BT200 Automotive Load Battery Tester Digital Analyzer Bad Cell Test Tool for Car/Boat/Motorcycle and More

$69.97 $44.99