Portable Jump Starter main use for 12V car battery energency power supply. Jump starter supports to supply for car battery or digital equipments like mobile phone and camera.
Portable Jump Starter 20000mAh for 12V Car Battery Multi-Functional Emergency Power Supply
Jump Starter Overview:
Color: Red, Yellow
Battery Cell Type: Lithium
Material: ABS Plastic
Voltage: 12 Volts
Item Dimensions(LxWxH): 160*80*30mm
Vehicle Service Type: Passenger Car, 12V Truck, Motorcycle, SUV, Truck, Boat etc.
LED Light Mode: Flashlight, Strobe and SOS
Jump Starter User Tips:
1. It takes about 3 hours for the product to be fully charged. You must turn ON first, and then charge the product.
2. When starting the car, you need to turn the switch to OFF before starting the car.
3. It is recommended to charge once every 3 months if you don't use it very often.
4. The product needs to be placed at room temperature, which is beneficial to the service life of the product.
2. When starting the car, please put the blue plug firmly in place, otherwise it may cannot work properly.
3. When starting the car, the blue battery indicator should be above 60%, which can extend the service life of the product.
4. If the car cannot be started, do not force it to continue. Check whether the battery clamp is properly clamped and whether the battery head of the original car is rusty or dirty. Continue to start after cleaning up.
5. During the starting process, if the vehicle cannot be started all the time (1-2 times), do not force it to continue, check everything again and whether there are other faults, otherwise the fuse will be burned and the starting power supply will be damaged.
6. When the car already in using the clip port with the air pump or other on-board electrical appliances, you need to turn the switch to OFF.
7. Our Jump Starter supply uses 600A peack value. If your car exceeds the peack value of the product, the power supply will have an automatic power-off protection function during the start of the car. Plug in the charger and reactivate it and you can use it normally.
8. When the car is out of battery or has no electricity, just clamp thecar power clip directly on the positive and negative poles of the car to start. If the car is powered, remove the positive pole and clamp the clip on the top of the positive ground system iron, clamp the negative pole on top of the negative pole. Then you can start your car.
9. If it's the first time you start the car, you need to discharge the power in the jump starter, then plug in the charger to charge, and start the car.
Remove the clip after successful startup (recommended to remove within 30 seconds).
Jump Starter Features:
【Powerful Jump Starter】Battery Booster can jump start 12V vehicles (up to 6.0L gas/5.0L diesel engine) in seconds with 600A peak current and 20000mAh battery capacity. Suitable for your car, truck, motorcycle, boat etc.
【Quick Charging 4 USB Ports】This Car Jump Starter designed with 4 USB output ports, the quick charge 3.0 USB port not only provide 3 times faster charging speed than usual, but also compatible with almost all USB charging specifications of products and devices.
【Super Portability】Unlike some big & heavy jump starters, this Jump Starter is small enough to store in your cars anywhere and light enough to pack in your bag.
【LED Flashlight & Power Bank】The LED Flashlight can switch between lighting, strobe and SOS modes under different circumstances. Not only a car booster, it can be used as a power bank to fully charge your phone, iPad, camera or other device.
【Upgraded Safety Features】The battery jumper starter has intelligent safety functions to ensure the safety of the user in all modes of operation. Including short-circuit protection, over-temperature protection, reverse polarity protection, reverse connection protection, over-current protection, over charge protection, over load protection and over-voltage protection, short circuit protection on making it super safe for anyone to use.
How to Start Your Car by Jump Starter?
1. Plug the clip into the power start port to make sure it is plugged in and fully powered.
2. The red clamp is connected to the positive pole of the car battery, and the black clamp is connected to the negative pole of the car battery.
3. Ignition on and start the car.
4. Remove the clip after successful startup (it is recommended to remove within 30 seconds).
Q1: How to turn off the jump starter?
A1: The tool will power off automatically when no connection or charing is complete.
Q2: How many times can it fully charge for mobile phone?
A2: For example Iphone 6, it can be fully charged around 5 times.
Q3: How many times can this Jump Starter start the vehicle on a full charged condition?
A3: Approx. 20 times.
Q4: How long will the battery last if not use?
A4: 6-12 months around. We recommend to recharge it every 3 months.
1pc x Jump Starter
1pc x Battery Clamps
1pc x USB Cable
1pc x DC Adapter
1pc x Car Charge Cable
1pc x User Manual