KT200 ECU programmer is used to read and write Engine Control Units (ECU) FLASH and EEPROM in OBD, bench, and boot mode in heavy vehicles, passenger cars, motorcycles, marine and construction vehicles.
KT200 ECU Programmer is a complete tool for reading and programming engine control units via OBD and via the Boot mode and Jtag systems. Full system and Bench mode also available.
KT200 ECU Programmer Highlights:
1. KT200 ECU Programmer covering up to 5400 ECU, over 500 TCU.
2. Support Audi/VW ECU Clone via Bench Mode.
3. Support OBD/BENCH/BOOT/BDM/JTAG.
4. Software Version:22.08.20
5. Bosch EDC17, MED17/ME17, and SIEMENS Pcr2.1(with Pinout also nlocking possibility) read and write in Bench Mode.
6. Vehicle list is constantly updated stays ahead of the industry.
7. The KT200 ECU programmer software allows you to forcibly write (forcible clone) without checksumming and supports forcibly reading and writing unknown ECUs with supported chip models.
8. Covering a full range of German, ECU Programmer, Japanese, American and Chinese models.
9. Operation System: Windows 7, Windows 8/8.1, Windows 10, Windows 11, CPU > 2.5 GHz (Intel i5, i7), RAM > 8GB
More Details on the official website: http://www.ChipTuningKit.com
KT200 ECU Programmer Device has 2 Version:
1. Auto Version: Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear.
2. Full Version: Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear, Tractor OBD, Boat OBD, Motorbike OBD,
You can update Auto Version to be Full Version, provide S/N:
ChipTuningKit KT200 ECU Programmer Functions:
1. ECU/TCU clone
2. Read and write ECU data
3. ECU maintenance engineering
4. Full read and write ECU/TCU data
5. OBD2 reading(Currently only supports 2008-2020 vehicles, )
6. Checksum correction
7. Read and write Virtual data
8. Supports online update
9. Full read and write TCU (Micro+EEPROM)
10. Must work online (access online server)
Notion:
1. Please close the anti-virus program before you running the KT200 software, it may incorrectly identify the software as harmful and break it.
2. Please connect to the Internet to work with KT200 software, otherwise, it will not work.
3. We provide the following items: DTC code Removal EGR & DPF Removal, IMMO OFF, releasing speed limit, mileage correction, Hot start or Cold Start Vmax, and so on.
Downloads:
ChipTuningKit KT200 ECU Programmer User Manual
ChipTuningKit KT200 ECU Programmer Support ECU List
ChipTuningKit KT200 ECU Programmer Support TCU List
ChipTuningKit KT200 ECU Programmer Software V22.08.20
Get Free VR file in this Software ECUHelp
KT200 ECU Programmer Multiple connection possibilities:
JTAG CONNECTION:
BENCH MODE EDC16/ME9/EDC7:
BDM CONNECTION:
BOOT MODE CONNECTION:
Professional software for reading and programming the control units of:
CAR
TRUCK MOTORBIKE
TRACTOR
BOAT
Additional TCU package is available for Automatic Transmission.
FULL READ AND WRITE VIA PIN OUT IN BENCH MODE:
BOSCH EDC7
BOSCH EDC16
BOSCH ME9/MED9
FULL READ AND WRITE VIA PIN OUT IN BENCH MODE:
BOSCH MD1
BOSCH MG1
FREESCALESPC5777
AURIXTC29x
STSPC58
FULL READ AND WRITE VIA PIN OUT IN BENCH MODE:
BOSCH EDC17
BOSCH MED17/ME17
SIEMENS PCR2.1
(Unlocking also possible via pinout)
FULL SYSTEM VIA PIN OUT (MICRO/FLASH+EEPROM) OF ECUs:
BOSCH
CONTINENTAL
DELCO
DENSO
MARELLI
SIEMENS
TEMIC
TEMIC
BDM EJTAG MODES FOR:
BDM MPC55x
BDM MPC56x
BDM MC32/ZC32
BDM HC12/S12x
JTAG NEXUS MPC/SPC56xx
JTAG NEXUS MPC55xx
JTAG RENESAS
SH7055
SH7058
SH7059
SH7251
SH72543
SH72544
JTAG NEC76F00xx
76F0038AGD
76F0038GD
76F0039AGD
76F0039GD
76F0040GD
76F0070
76F0070
76F0085
BOOT MODES:
BOOT MODE C16729Fxxx
BOOT MODE STK-LINE/RX-TX/CAN
ST10F168
ST10F269
ST10F273
ST10F275
ST10F276
ST10F276
ST10F280
ST10F296
BOOT MODE Tricore for micro
TC1724
TC1728
TC1738
TC1738
TC1762
TC1766
TC1767
TC1782
TC1791
TC1792
TC1793
TC1793
TC1796
TC1797
SBOOT MODE Renesas
H7052
SH7054
SH7055
SH7055
SH7058
SH7059
SH7251
SH72543
SH72544
BOOT MODE Mitsubishi
MH7202
MH7203
MH8102F
MH8105F
MH8106F
MH8202
MH8206F
MH8301F
MH8301F
MH8304F
MH8405F
BOOT BAM SYSTEM MOTOROLA
SPC5674
SPC5777
BOOT MODE Fujitsu
BOOT MODE Hitachi
ADDITIONAL PACKAGE FOR AUTO MATIC TRANSMISSION
FULL READ AND WRIT ETCU (MICRO+EEPROM)
TCU CLONING
TCU CODING FUNCTIONS
KT200 ECU Programmer Packing List:
Master x 1,
BENCH BOX x1,
OBD wires x 2,
pinout line x 1,
BOM adapter x4,
Transfer cables x 3,
Power wire x 4,
Set of resistors x1,
Adapter plugs x 4 sets,
Power adapters x 5 sets.
Software(Optional): Auto Version/Full Configuration Software
