OBDSTAR MT203 CAN Driver Gateway Simulator

$79.00

1. CAN Drive Function

The Dash, Audio, Gear Lever, Handbrake, and other modules of the latest vehicles enter a working state mainly through CAN transmission. However, occasionally automotive technicians servicing the module are detaching from the vehicle's CAN network, thus causing no operational status. This function can simulate CAN communication to wake up the ECU module so that the module can enter the working state, which can be tested and verified. It also saves the need to purchase many startup platforms and wiring harnesses for various vehicle models, reducing costs for automotive technicians.

 

2. Gateway Function

At present, an increasing majority of automobiles are designed with gateway modules for security and efficiency reasons scanners, the majority of ECU modules and diagnostic scanner requires a gateway to pass through the protocol type and baud rate to accomplish the communication. When the ECU module needs to be detected with the diagnostic scanner, it requires an additional connection to the corresponding model's gateway to complete the transmission, which greatly causes inconvenient detection. MT203 gateway simulator works to emulate the majority of automotive gateways to accomplish various types of protocols and baud rate conversion, and the diagnostic scanner provides an efficient way to communicate with the ECU module. Eliminates the need to purchase different gateways for various models and creates wiring test platforms, reducing costs for automotive technicians.

Out of stock

Security Payment

paypalvisamastergoogle payapple payamerican expressbancontact

OBDSTAR MT203 CAN Driver Gateway Simulator for automotive electronics maintenance and repair provides CAN drive and gateway simulation function  supports multiple vehicles


Why you need OBDSTAR MT203?

1. CAN Drive Function

The Dash, Audio, Gear Lever, Handbrake and other modules of latest vehicles enter working state mainly through CAN transmission, however, occasionally automotive technicians servicing the module are detaching from vehicle CAN network, thus causing no operational status. This function can simulate CAN communication to wake up the ECU module, so that the module can enter the working state, which can be tested and verified. It also saves the need to purchase a large number of startup platforms and wiring harnesses for various vehicle models, reducing costs for automotive technicians.

2. Gateway Function

At present, an increasing majority of automobiles are designed with gateway modules for security and efficiency reasons, the majority of ECU modules and diagnostic scanner requires a gateway to pass through the protocol type and baud rate to accomplish the communication. When the ECU module needs to be detected with the diagnostic scanner, it requires an additional connection to the corresponding model's gateway to complete the transmission, which greatly causes inconvenient detection. MT203 gateway simulator works to emulate the majority of automotive gateways to accomplish various types of protocols and baud rate conversion, and the diagnostic scanner provides an efficient way to communicate with the ECU module. Eliminates the need to purchase different gateways for various models and create wiring test platforms, reducing costs for automotive technicians.

MT203 Coverage List

Applicable Maintenance Scenarios

1. Automotive electronic ECU repair (Airbag, Dash, BCM and other modules simulation gateway diagnostic test by BENCH)

2. Automotive electronic ECU repair (Dash, Audio, Gear Lever, AC panel and other modules CAN drive test by BEHCH)

3. E-car components repair (Compressor, DCDC, On-board charger and other modules simulation gateway diagnostic test by BENCH)

Advanced Functions:

Using STM32H723 high-performance MCU, fast running speed;
Support standard CAN, Low speed(fault-tolerant CAN), CAN FD protocols: 
Automatic scanning, manual baud rate selection, custom input baud operation;rate and other modes to simulate different types of gateways;
Integrated design, comes with 120Ω resistor switch, easy to operate;
Simple and intuitive menu allows you to quickly master the device;
Mini USB upgrade cable directly connected to the PC for one-key upgrade.

Supported Protocol Types/Functions

1. Gateway Supported Protocols

Standard CAN/Standard CAN

       500K/250K

       500K/125K

       Custom Baud Rate

Standard CAN/Tolerant CAN

       500K/83.3K

       500K/100K

       500K/125K

       125K/125K

       Custom Baud Rate

Standard CAN/CAN FD

       500K/5M

       500K/2M

       Custom Baud Rate

2. CAN Driver Supported Functions

Supports Dash, Audio, Gear Lever, AC Panel and other test functions for AUDI, BENZ, BMW, DODGE, FORD, JAGUAR, LAMBORGHINI, LAND ROVER, PORSCHE, ROLLS-ROYCE, VOLKSWAGEN, VOLVO and other brands.

For detailed list, please reference the function manual, more functions are under development.

Function Display-(From OBDSTAR Mobile App)

1) Main Page

2) Gear Lever Pinout

3) Dash Pinout

4) Radio Pinout

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

OBDSTAR MT203 CAN Driver Gateway Simulator

$79.00