Op Com OP-Com V1.59 V1.7 V1.95 V1.99 Firmware for Opel OP-COM Diagnostic Interface is the latest 2014 version diagonistic interface for Opel OP com with PIC18F458 Chip. OPCOM 2014 diagnostic tool for Opel cars covers almost all Opel cars.Opcom 2014 can read and clear fault codes, support many control units
New OP com firmware 1.59 Features:
1.Firmware: opcom V1.59/V1.7/ V1.95/ V1.99
2.Feature: With pic18f458 chip
3.Software version: 2014.01 ,It connects to the car during 2013-2014.
5. OPCOM is a special PC Based diagnostic interface especially for OPEL.
6. Never Update It Online, It Will Damage The OP-COM !
7. Support Language: Only English
Attention for Latest Opcom Software VAUX-COM_120309a.exe:
Note:
- 1. CD probelms:We send the CD as a free gift , So pls do not open a dispute or give a negative feedback because the CD was broken , long transport is easy to damage it ,just leave me your email,we will send it to you
- 2. Before you downloading or installing it , Pls shutdown the anti-virus Software in your computer first , Some files would be seem to virus, But it is harmless and necessary for installing
- 3. Never Update It Online, It Will Damage The OP-COM ! There is no need to active the software, can be used directly
Newest OPCOM Firmware 2014V Software Function:
- 1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
- 2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
- 3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
- 4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
- PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
- 5. Fault codes will be shown with all available information.
Full Fault Code Text Description:
- 1) Full status information (Present, Not present, Intermittent)
- 2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
- 3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
- 4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
OP-Com Firmware V1.59 diagonistic interface Software:
Op-com Firmware 1.59 FAQ:
Q: Does this product has any other language other than English?
A: Sorry, all OPCOM 2010V only has English version at present. While opcom 2009 version has English and German language.
Q: What is the difference between opcom v2010 and opcom v2009?
A: Opcom v2010 only has English language up to now, while opcom v2009 has German and English language. Opcom v2010 can support more car models than Opcom V2009.
Q: This op-com can reset airbag errors?
A: Sorry to tell you that this opcom can used for read/clear fault codes.
Opcom China Clone 2014 Package list:
1pc x OP COM Interface
1pc x USB Cable
1pc x Opcom China Clone Software and Drivers CD
Contact Information
Whatsapp: +86 1361282 7578
Email: info@getobdtool.com
Skype: getobdtool
