THINKTOOL PAD 10 is a professional OBD2 Automotive Scanner from THINKCAR, who love car modification, are proficient in car maintenance and master mobile Internet technology. THINKCAR THINKKTOOL PAD 10 has many features meet your need.
THINKCAR THINKTOOL PAD 10:
THINKCAR THINKTOOL PAD 10 advantages:
Topology Mapping displays a system distribution diagram of the vehicle control modules
•Advanced ECU coding & Active Tests/Bi-Directional Control/ADAS Calibration/TPMS Programming
•Support CAN FD protocol (you need to buy can fd connector yourself)
•34+ Hot Reset Services
• Support online coding (for Volkswagen, for Audi, for BMW）
• Support offline coding for Mercedes-Benz
• Support guidance function (for Volkswagen, for Audi)
• Support thinkcar ADAS advanced driver assistance system calibration tool
• Support intelligent topology map display, quickly lock system error codes
•Diagnostic Report Generate and Share
•120+ Brands, and 10,000+ Models
•Auto VIN & DTCs Lookup
•Data Stream Recording & Screen Recording Function
•One clicks WiFi free update for 2 years, the old version can still be used after two years, all functions are not affected
•Lifetime free remote technical diagnosis
•Advanced Features:
✔ Tablet with 8.0 MP Pixel Rear Camera, 10-inch HD IPS Touch Screen: A brighter, clearer Screen let you " Deep Dive into Diagnostics"
✔ Android 10.0 Operating System: make you smooth operation, Anti-Slip & Anti-Grease protective sleeve design
✔ Brilliant Battery Life: 5100mAh/ 3.8V
✔ 6GB RAM / 128GB ROM
✔ Multi-PID Live Data Graphing in 1 Screen: One screen can display 12 data stream (Graphic and textual
NOTE: Topology is not universal to all the vehicles, please check VIN for compatibility before you place order!
12 In 1 Data Stream Charts:
THINKCAR THINKTOOL PAD 10 is a Dealership Tool Level All Systems Diagnostics:
ThinkTool PAD 10 automotive scan tool can work on 120+ US domestic, European and Asian vehicle makes to scan all available modules like ECM(engine), TCM(Transmission), ABS, SRS(Airbag), Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(heat, ventilation and air conditioning), Radio, TPM and etc to perform OE level diagnostics to read and clear codes, view live data stream, perform active tests, and retrieve ECU information.
Full system diagnosis of intelligent topography (identification of normal and fault equipment)
ThinkTool PAD 10 read DTCs and data streams, perform active test, ECU Coding.
For instance: Engines/Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti-Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi-Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics and etc.
THINKCAR THINKTOOL PAD 10 Support 34+ Special Functions
New advantages over other scanners:
29. Motor angular position sensor calibration
When the motor works in a high temperature environment or in a humid, dusty and other environment for a long time, the angular position sensor is prone to failure, and the signal of the angular position sensor is wrong after the failure, resulting in the motor not working normally, the system reliability is reduced, and the normal driving of the vehicle is affected. . At this time, it is necessary to calibrate the angular position sensor of the motor.
30. Engine power balance
High-quality engine balance that helps the engine spin more freely at high revs, improves redline, and increases power
31. High-voltage battery health inspection
32. Smart Cruise Control Calibration
Intelligent cruise control has the function of improving driving safety and comfort. When the intelligent cruise module is replaced, use this function to learn and match, and the system can function normally.
33. Automatic air conditioning initialization
34. GPF regeneration (particle trap regeneration)
The function of gpf is to reduce particulate matter, and it is arranged on the exhaust system of the car to collect the particulate matter in the organic exhaust gas of the car, reasonably reduce the emission of particulate matter, and according to the ECU operation, carry out air oxidation and ignition of the particles in the trap, and then do to regeneration
Rest Function:
1. Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset the cluster or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.
2. DPF Regeneration
DPF Regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such us high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
DPF regeneration may be performed in the following cases:
a) The exhaust back pressure sensor is replaced.
b) The PM trap is removed or replaced
c) The fuel additive nozzle is removed or replaced
d) The catalytic oxidizer is removed or replaced.
e) The DPF regeneration MIL is on and maintenance is performed.
f) The DPF regeneration control module is replaced.
3.AFS(headlamp) Reset
The feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.
4. EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
5. Brake-pad Reset
If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
Reset must be performed in the following cases:
a) The brake pad and brake pad wear sensor are replaced.
b) The brake pad indicator lamp is on.
c) The brake pad sensor circuit is short, which is recovered.
d) The servo motor is replaced.
6.IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote-control battery is replaced, anti-theft key matching must be performed.
7.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
8.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
9.Steering Angle Reset
To reset the steering angle, first find the relative zero-point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.
10.Injector Coding
Writing injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that cylinder can better identify injectors to accurately control fuel injection.
11.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
12.Transport Mode
In order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
13.Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared, and battery matching will be done.
Battery matching must be performed in the following cases:
a) Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function, power window without automatic function.
b) Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately, which can avoid an error message displaying on the instrument panel.
14.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collides and the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code can't be cleared. Since the data inside the airbag computer is disposable, it is required that all new accessories must be emplaced, but after performing this function, the data of the airbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and the airbag computer can continue to use.
15.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
16.Cluster Reset
a) cluster reset is to copy, write, or rewrite the value of kilometers in the chip of cluster by using a car diagnostic computer and data cable, so that the cluster shows the actual cluster.
b) Usually when the cluster is not correct due to the damaged vehicle speed sensor or cluster failure, it is necessary to do cluster reset after maintenance.
17.ABS Bleeding
When the ABS contain air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed.
18.Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computer to more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped with Delphi engine, the MlL turns on after the engine is started. The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.
19.Language Change
This function is used to change the system language of the vehicle central control panel.
20.Adblue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
21.Elec. Throttle Adaption
Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state. By doing these, the movement of the throttle (or idle motor) can be more accurately controlled, thus adjust the intake volume.
22.Suspension Matching
This function can adjust the height of the body. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.
23.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
24.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (NOx)in engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
25.TPMS Reset
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL. Tire pressure resetting must be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, and tire is replaced for the car with tire pressure monitoring function.
26.A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.
27.Sunroof Initialization
This function can set the sunroof lock off, closed when it rains, sliding/tilting sunroof memory function, temperature threshold outside the car etc.
28.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided that the vehicle has a hidden function and supported by hardware)
ADAS Calibration service:
Real-time scanning of lane line and the information of the vehicle ahead. When the vehicle deviates from the original lane or is too close to the vehicle in front, the system can quickly detect and judge, and sound an alarm to remind the driver, so as to avoid deviating from the lane or braking in time. A traffic accident occurred.
Online ECU Coding:
The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc.
Active Test:
Active Test capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators.
TPMS Programming, Activation, Learning:
NOTE: need to buy thinkcar G1 sensor in separately.
Quick registration and activation, one-click upgrade:
There is no complicated operation, and there will be a full operation prompt when starting up.
Auto-VIN & Diagnose report:
This OBD2 scanner uses Auto VIN technology, to provide quick and accurate car identification in one touch, without the manual input of vehicle make, model, and year data. After that, this scan tool will lead to diagnostics where you can choose the systems to scan.
As well as providing a diagnostic report, it is convenient for you to compare the condition of the car at different times.
THINKCAR THINKKTOOL PAD 10 Support More Features:
THINKCAR THINKKTOOL PAD 10 Support Multiple Expansion Modules:
22 Multi-languages Supported:
English, German, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Dutch, Hungarian, Traditional Chinese, Korean, Greek, Slovak, Romanian, Arabic, Croatian, Slovenian, Finnish, Czech
NOTE: Please update to the latest version to see 22 languages
THINKCAR THINKTOOL PAD 10 Support 10000+ models:
American: for BUICK, for CADILLAC, for CHEVROLET,
for Christerfer, for DODGE, for FORD
for GM, for JEEP, for LINCOLN
European: for ABARTH, for ALFA ROMEO, for ASTON MARTIN
for AUDI, for BENTLEY, for BMW
for BUGATTI, for CITROEN, for DACIA
for DR, for FORD(EUROPE), for FERRARI
for FIAT, for GAZ, for OPEL (SOUTH AFRICA)
for IVECO, for IZH, for JAGUAR
for LAMBORGHINI, for LANCIA, for LAND ROVER
for MASERATI, for MAYBACH, for MERCEDES-BENZ,
for MINI, for OPEL, for PAZ
for PEUGEOT, for PORSCHE, for RENAULT
for ROLLS ROYCE, for ROVER, for SAAB
for SEAT, for SEAZ, for SKODA
for SMART, for SPRINTER, for VAUXHALL
for VOLVO, for VW
Asian: for ACURA, for DAEWOO, for DAIHATSU
for HONDA, for HYUNDAI, for IKCO
for INFINITI, for ISUZU, for KIA
for LEXUS, for LUXGEN, for MAHINDRA
for MARUTI, for MAZDA, for MITSUBISHI
for MVM, for NISSAN, for GTR(NISSAN)
for PERODUA, for PROTON, for SAMSUNG
for RENAULT SAMSUNG, for SAIPA
for SSANGYONG, for SUBARU, for SUZUKI
for TATA, for ISUZU(THAILAND), for TOYOTA
for UNITED PAKISTAN
Chinese: for SENOUA(BAIC), for WEIWANG(BAIC), for BJEV
for BAIC, for BRILLIANCE, for BYD
for CHANGAN, for CHANGHE, for BUICK(CHINA)
for CHERY, for CHANCHE SUZUKI
for DFCITROEN, for ECUAID, for FAW (TIANJIN,
for FOTON, for GEELY, for JINLONG
for GONOW, for GWM, for HAFEI
for HAIMA, for JAC, for JAC REFINE
for SHIERAY, for JMC, for JOYLONG
for LIFAN, for MG(SAIC), for QOROS
for MAXUS, for SGM, for SOUEAST
for SPARK, for SGMW, for DFSK
for XINKAI, for POLARSUN, for ZX AUTO, for ZOTYE
Russian: for UAZ, for VAZ, for ZAZ
Brazil: for Fiat, for GM
Malaysia: for PERODUA, for PROTON
India: for MARUTI, for MAHINDRA, for TATA
Australia: for HOLDEN, for FORD
THINKCAR THINKTOOL PAD 10 Parameter and Details:
THINKCAR THINKTOOL PAD 10 Packing List:
1pc x Main Tablet
1pc x NN-14+16
1pc x OBD 1 Adaptor
1pc x Xigeartt Lighter Cablet
1pc x OBD 2 16pin mian cable
1pc x power cable Clips
1pc x For benz-38
1pc x M/H-12+16
1pc x USB-type C
1pc x For FIAT-3
1pc x VCI Bluetooth adaptlot
1pc x TA-17
1pc x HA-3
1pc x CR-6
1pc x TA-22
1pc x G/V+12
1pc x For BMW-20
1pc x CN Plug
1pc x US Plug
1pc x UK Plug
1pc x EU Plug
1pc x 5A250V Fuse*2
1pc x 5JF5AL250V Fuse*4
1pc x packing list
1pc x User's manual
1pc x password letter
