V-olvo RS232 Serial Diagnostic Cable Interface V-olvo FCR 1.3

$15.06 $9.99

● New Design! 232 Chipset based design
● Works excellently v-olvo fault code reader 1.3 serial
● version Serial port design, supports the most chanllenging time-critical application like serial EEPROM programming.

Out of stock

Security Payment

paypalvisamastergoogle payapple payamerican expressbancontact

V-olvo serial diagnostic cable is V-olvo vehicle RS232 OBDII cable. V-olvo RS232 cable support v-olvo FCR 1.3 version. V-olvo vehicle RS232 OBDII diagnostic cable with Software CD for V-olvo cars including 800 Series, C70, S40, V40, S70, V70, 900 series, S90 and V90.

V-olvo Serial Diagnostic Cable V-olvo RS232 Cable Support V-olvo FCR1.3 version

V-olvo Vehicle RS232 OBDII Diagnostic Cable with Software CD

V-olvo Serial Diagnostic Cable Support Vehicle List

PC based code reader and live data scan tool for V-olvo cars including 800 Series, C70, S40, V40, S70, V70, 900 series, S90 and V90.

V-olvo Serial Diagnostic Cable Features

New Design! 232 Chipset based design
Works excellently v-olvo fault code reader 1.3 serial
version Serial port design, supports the most chanllenging time-critical application like serial EEPROM programming.

V-olvo RS232 Diagnostic Cable Supported Software

OnBoardDiagnostics Versions: 1.3
V-olvo FCR Communication Interfaces to connect a V-olvo Vehicle to a PC

V-olvo Serial Diagnostic Interface used for

V-olvo serial Diagnostic interface (adapter) is used as an interface and an Serial cable to connect a v-olvo vehicle to a PC for on-board diagnostics (OBD). It is fully compatible with the diagnostic software version 1.3 from V-olvo FCR. V-olvo FCR is a software program that turns your PC into a sophisticated V-olvo diagnostic tool.

V-olvo Serial Diagnostic Cable Features and Benifits

-Supports V-olvo FCR version 1.3 or older
-Precision-molded diagnostic connector made to fit all v-olvo vehicles, even those with "tight" trim around diagnostic socket
-LED light indicating communication status
-High quality UL certified Serial Cables (equivalent to CE)
-Built-in, Electronic Protection from the "Aftermarket Radio Problem"

What is V-olvo FCR ?

V-olvo FCR is a Windows-based Diagnostic Software for V-olvo that emulates the functions of the dealers` very expensive proprietary scan tools. As the first aftermarket V-olvo-Tool, it has the following features:
V-olvo control module coverage includes:
-Engine - Petrol and br />-ABS
-Automatic transmission
-SRS - airbag and other protection systems
-Driver and passenger seat memories
-Instruments, including service light reset
-Climate control - air conditioning
-Immobilizer
-Alarm
-Road traffic information
-Additional heater

How to Use V-olvo Serial Diagnostic Cable?

-For laptops and PCs, download the shareware 1.3
-Run it and follow the prompts to allow it to install itself.
Note: You must install v-olvo FCR on your PC`s hard disk -- it will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.
-Connect the interface between the computer and the car by plugging one end of the interface into a Serial (RS232) (or USB port ) on your PC and the other end directly into the OBD-II port present passenger vehicles.
-Turn the car`s ignition switch ON. No need to start the engine.
-Start the V-olvo program,
-Now it works. Make sure the software can reliably access all the control modules that it should in your car.
What are the system and computer requirements?
-A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. V-olvo FCR may work on some lesser PC`s, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, V-olvo FCR requires less than 1 MB.
What are the system and computer requirements?
-A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. V-olvo FCR may work on some lesser PC`s, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, V-olvo FCR requires less than 1 MB.

V-olvo Serial Diagnostic Cable Packing List

1pc x V-OLVO Serial Cable
1pc x CD Drive


Contact Information
Whatsapp:+86 136 1282 7578
Email: info@getobdtool.com
Skype: getobdtool

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

V-olvo RS232 Serial Diagnostic Cable Interface V-olvo FCR 1.3

$15.06 $9.99