XTOOL INPLUS IP919 wireless Bi-directional diagnostic tool Supports FCA AutoAuth Access ECU Coding & Programming 42+ Reset Functions With 3 Year Upgrade.

XTOOL INPLUS IP919 Highlights:

1. Full System Diagnostic

2. Full OBD2 Diagnostic

3. FCA AutoAuth

4. Key Programming 

5. ECU Coding & Programming

6. Bi-directional Control (Active Test)

7. VAG Guided Function for VW

8. Smart Topology Mapping

9. 42+ Reset Functions

10. High-level ADAS Calibration

11. Wireless Bluetooth VCI

12. 15+ Languages Support

13. 10.1-inch with 1920*1200 resolution

14. 8+128G High-capacity Memory

15. Specialized Charger Base

16. Support DOIP / CANFD Protocol

17. 3-year Free Update

XTOOL INPLUS IP919 Functions:

Advanced ECU Coding ( Support Online & Offline Coding)

• ECU Coding: for V-W(For V-W / A-UDI / Škoda) / for B-ENZ / for Mitsubish: XTOOL IP919 OBD2 scanner performs ECU Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.
• ECU Configuration: for B-MW / V-W / A-UDI / Škoda / TO-YOTA / LEXUS / SCION / MAZDA / FORD / LINCOLN: IP919 helps to activate the higher-level car functions and disable any annoying features including disabled the seat belt buzzer, wind the windows down with the remote fob, deactivate the Start/Stop function, etc.

Unprecedented Features FCA AutoAUth

InPlus IP919 supports gateway access via registered AutoAuth to get diagnostic access to read/clear codes, run bi-directional tests, scan all systems, and get resets & relearn etc for Chrysler, for Dodge, for Jeep, for Fiat, etc (2018 and later FCA vehicles).

Built-in DOIP / CANFD Protocol

Inplus IP919 Support DOIP & CANFD Protocol, It can diagnostic with ultra-high data transfer rates, and it is also one of the most important means of solving the problem of rapid ECU updating, calibration, and remote diagnostics.

OE-Level Full System Diagnostic (For All Available Modules In Vehicles)

Inplus IP919 can perform complete system diagnoses to check ECU info, read codes, clear codes, read freeze frame and live data. It can carry out a comprehensive diagnosis for cars' system, such as the engine, airbags, chassis, body, network system, transmission, anti-lock system, etc.

It is suitable for all system, including ABS system, Engine system, SAS system, TPMS system, IMMO system, Battery system, Oil service system, SRS system, etc...ECM System (Engine Control Monitor), SRS (Supplement Restraint System), TCM (Transmission Control Module), IMMO (Immobilizer), ABS (Anti-lock Braking System), TPMS (Tire Pressure Monitoring System), BMS (Battery Monitor System), etc.

Intelligent Topology Map To Show A Intuitive System Status

Inplus IP919 with practical and intelligent topology map, which clearly shows the location of the fault and the overall condition of the system in the car, and concludes which diagnostic line the faulty system is coming from.

Bi-Directional Control(Cover 4000 Actuation Test)

XTOOL InPlus IP919 bi-directional scanner supports active tests to output the command into the ECU to request information or command a module to perform specific tests and functions.To find faults in the subsystems of your car effortlessly, without using the vehicle’s control, including EVAP Test, Injector Buzz Test, EGR Test, Window/Mirror/Door Lock Test, A/C Clutch On/Off, ABS Pump Cycling, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, More...

42+ Special Functions To Perform Comprehensive Vehicle Service Maintenance

• Oil Reset: Reset service intervals after oil change and turn off the oil light.
• EPB Reset: Reset brake pads after replacement of brake system.
• SAS Adjustment: Perform calibration of the steering angle sensor
• DPF Reset: Perform DPF regeneration
• BMS Reset: Register the new battery to the ECU after replacement.
• Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake
• ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.
• Injector Coding: Coding injectors after replacement.
• Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.
• Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.
• Key Programming/IMMO: Disable the lo~st vehicle keys and program a new replacement key fob.

More Special Functions Added: Steering position sensor calibration, Zero Point Calibration, Injector balance test, ECU Configuration, VGT Turbo Calibration Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Language change, A/F Settings, Stop/Start Reset, etc. Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.

Basic Smart IMMO & Key Programmer Capability

Key programming means matching a smart key to a specific vehicle's security system. This process ensures that only the programmed paired key can start the vehicle, greatly increasing security. It is mainly used to replace lost or damaged car keys or to add additional spare keys. A thorough key programming process involves encoding a wireless signal between the smart key and the car, ensuring that the car receives and recognizes the signal and works as intended.

XTOOL IP919 offers key programming functions like programming new key fobs, reading PIN Code, adding smart keys, remote learning.

Main Functions:
1.Key All-lost Matching
2.Key Add Matching
3.Key Info Reset
4.Key Adding

Smart Manual VAG Guided Function

When you connect this diagnostic scan tool to VW/ to Audi/to Skoda, its Guided Function will analyze systems and provide step-by-step instructions to complete sensor calibration, matching, and more.

XTOOL INPLUS IP919 Vehicles Coverage:

XTOOL IP919 diagnostic tablet can work on 20,000 vehicles globally to perform all systems diagnostics and emission check,Up to 2024, 2023, including cars, SUVs, minvans, 12v light-duty trucks

For European: For ABARTH, For ALFA ROMEO, For A-UDI, For BENTLEY, For B-MW, For CITROEN , For DACIA, For DR, For EUROFORD, For FIAT, For GAZ, For OPEL(SOUTHAFRICA), For IVECO, For JAGUAR, For LAMBORGHINI, For LANCIA, For LANDROVE, For MERCEDES, For MINI, For OPEL, For PEUGEOT, For POR-SCHE, For RENAULT, For SAAB, For SEAT, For SKODA, For SMART, For SPRINTER, For VO-LVO, For V-W, For BORGWARD, For ASTON MARTINA.

For American: For BUICK, For CADILLAC, For CHEVROLET, For CHRYSLER, For DODGE, For FIAT(BRAZIL), For FORD, For FORD(AUSTRALIA), For G-M, For JEEP, For LINCOLI, For G-M（BRAZIL）

For Asian: For ACURA, For DAEWOO, For DAIHATSU, For HM, For HOLDEN(AUSTRALIA), For HONDA, For HYUNDAI, For IKCO, For INFINITI, For ISUZU, For KIA, For LEXUS, For LUXGEN, For MAHINDRA, For MAHINDRA(INDIAN), For MARUTI,For MAZDA, For MITSUBISHI, For MVM, For NISSAN, For GTR(NISSAN, For PERODUA, For PERODUA(MALAYSIA, For PROTON, For PROTON(MALAYSIA, For SAMSUNG

For Chinese: For BRILLIANC, For BYD, For CHANGAN, CHANGAN-FORD, , For CHANGHE, For CHBUICK, For CHCADILLAC, For CHCHEVRO-KET, For CHERY, For CHSUZUKI, For DFCIROEN, For HONDA(DF), For DFNISSAN, For DFEUGEOT, For ECUAID, For FAW(TIANJIN, For FOTON, For GOLDEN(XIAMEN, For GONOW, For MITSUBISHI(GAC, For GREAT WALL, For HONDA(GAC, For SGM, For TO-YOTA(CHINA, For VENUCIA

15+ Language Support:

Inplus IP919 supports 15 languages, including English, German, Spain, French, Polish, Portuguese, Russian, Italian, Turkish, Traditional Chinese, Japanese, Korean, Vietnamese, Arabic, Finnish,etc.