Below read this article, you can check our related previous article as below:
Why use MB Star C4 and Enet Cable on the same laptop?
MB Star C4 works for all old cars, such as W213, W167, W257, and W222. while Enet cable is the best diagnostic tool to enter DOIP protocol, it works for new cars, such as W223, W206, W213 New, W214, and W295. Some people who don't want to change their laptop or have less budget will consider using the c4 and ENET cable on the same laptop.
How to configure the ENET cable to work for W223 W206 and new cars?
the ENET cable cannot work directly for W223 W206, needs configure, Please contact us to make it available, but this is a charge service.
What error you will get if not change C4 IP address?
After configuring the ENET cable, you may find XENTRT does not work anymore, that is because you didn't set the C4 IP address, every time you use C4, need to change the IP address.
Any other solution if I don't want to use the C4 and ENET cable on the same laptop?
You can use the original VCI which works for both old cars and new cars, don't need to configure and change the IP address.
How to change the MB Star C4 IP address after we configure the ENET cable on the same laptop?
1.Click control panel
2.Click Network and Internet
3.Click Network and Sharing Center
4.Change Adapter Setting
6.Click Internet Protocol Version 4 (TCP/ IPv4)
If you use ENET Cable to diagnose, program or code new cars, the IP address is defaulted as "obtain an IP address automatically " and "obtain DNS Server address automatically "
and when you are using the ENET cable, please keep our Certificate Manager 2.0 Software Run.
If you want to change to MB Star C4 for diagnosing, programming , or coding old cars, then you need to change IP address below
We GETOBDTOOL Team always provide the best diagnosing, programming, and coding solution for Mercedes Benz vehicles,
Welcome to contact us if you need any service.
Whatsapp: +86 1361282 7578